Blends of recycled polycarbonate and acrylonitrile-butadiene-styrene: comparing the effect of reactive compatibilizers on mechanical and morphological propertiesFARZADFAR, Alireza; SAIED NOURI KHORASANI; KHALILI, Shahla et al.Polymer international. 2014, Vol 63, Num 1, pp 145-150, issn 0959-8103, 6 p.Article

Characterization of multi-injected poly(ε-caprolactone)MORACZEWSKI, Krzysztof.Polymer testing. 2014, Vol 33, pp 116-120, issn 0142-9418, 5 p.Article

Combinations of Organic and Inorganic Wastes for Brick ProductionMOHAMMED, Mona S; AHMED, Abd Ei-Shafey I; OSMAN, Randa M et al.Polymer composites. 2014, Vol 35, Num 1, pp 174-179, issn 0272-8397, 6 p.Article

Continuous production of liquid reclaimed rubber from ground tire rubber and its application as reactive polymeric plasticizerJINWEI SHI; HUA ZOU; LINLIN DING et al.Polymer degradation and stability. 2014, Vol 99, pp 166-175, issn 0141-3910, 10 p.Article

Mechanical, Chemical, Thermal, and Rheological Properties of Recycled PA6/ABS Binary and PA6/PA66/ABS Ternary BlendsKURAM, Emel; SARAC, Levent; OZCELIK, Babur et al.Journal of applied polymer science (Print). 2014, Vol 131, Num 18, issn 0021-8995, 40810.1-40810.8Article

Processing and Thermal Properties of Composites Based on Recycled PET, Sisal Fibers, and Renewable PlasticizersDE OLIVEIRA SANTOS, Rachel Passos; CASTRO, Daniele Oliveira; RUVOLO, Adhemar Colla et al.Journal of applied polymer science (Print). 2014, Vol 131, Num 12, issn 0021-8995, 40386.1-40386.13Article

Pulverized Polyurethane Foam Particles Reinforced Rigid Polyurethane Foam and Phenolic FoamCHAO YANG; ZHUANG, Zhe-Hui; YANG, Zhen-Guo et al.Journal of applied polymer science (Print). 2014, Vol 131, Num 1, issn 0021-8995, 39734.1-39734.7Article

Real time measurement and control of viscosity for extrusion processes using recycled materialsBAO KHA NGUYEN; McNALLY, Gerard; CLARKE, Alan et al.Polymer degradation and stability. 2014, Vol 102, pp 212-221, issn 0141-3910, 10 p.Article

Reusing Textile Waste as Reinforcements in CompositesSUNIL KUMAR RAMAMOORTHY; PERSSON, Anders; SKRIFVARS, Mikael et al.Journal of applied polymer science (Print). 2014, Vol 131, Num 17, issn 0021-8995, 40687.1-40687.16Article

Study of Thermodegradation and Thermostabilization of Poly(lactide acid) Using Subsequent Extrusion CyclesAMORIN, Nathalia S. Q. S; ROSA, Gabriela; ALVES, Jefferson Fernandes et al.Journal of applied polymer science (Print). 2014, Vol 131, Num 6, issn 0021-8995, 40023.1-40023.8Article

Synthesis of Ethylene Terephthalate and Ethylene Naphthalate (PET-PEN) Block-co-Polyesters with Defined Surface Qualities by Tailoring Segment CompositionGEYER, Björn; RÖHNER, Stefan; LORENZ, Günter et al.Journal of applied polymer science (Print). 2014, Vol 131, Num 17, issn 0021-8995, 40731.1-40731.15Article

The thermal gravimetric studies for polymer samples of polyvinyl chloride (PVC) and polyvinyl alcohol (PVA) obtained by treatment with ionic liquid [bmim]BrTOMAR, Preeti A; YADAV, S. M; GUPTA, Gaurav R et al.Polymer bulletin (Berlin. Print). 2014, Vol 71, Num 6, pp 1349-1358, issn 0170-0839, 10 p.Article

Zinc(II)-Triflate as Catalyst Precursor for Ring-Closing Depolymerization of End-of-Life Polytetrahydrofuran to Produce TetrahydrofuranENTHALER, Stephan.Journal of applied polymer science (Print). 2014, Vol 131, Num 2, issn 0021-8995, 39791.1-39791.4Article

Glycolysis of flexible polyurethane wastes containing polymeric polyolsSIMON, D; BORREGUERO, A. M; DE LUCAS, A et al.Polymer degradation and stability. 2014, Vol 109, pp 115-121, issn 0141-3910, 7 p.Article

Low-Velocity Impact Response and Compression After Impact Assessment of Recycled Carbon Fiber-Reinforced Polymer Composites for Future ApplicationsJIAN SHI; BAO, Limin; KEMMOCHI, Kiyoshi et al.Polymer composites. 2014, Vol 35, Num 8, pp 1494-1506, issn 0272-8397, 13 p.Article

Recycling ground tire rubber (GTR) scraps as high-impact filler of in situ produced polyketone matrixSULCIS, Roberta; VIZZA, Francesco; OBERHAUSER, Werner et al.Polymers for advanced technologies. 2014, Vol 25, Num 9, pp 1060-1068, issn 1042-7147, 9 p.Article

Effect of PLA grades and morphologies on hydrolytic degradation at composting temperature: Assessment of structural modification and kinetic parametersGORRASI, Giuliana; PANTANI, Roberto.Polymer degradation and stability. 2013, Vol 98, Num 5, pp 1006-1014, issn 0141-3910, 9 p.Article

Effects of High Shear Stress on the Devulcanization of Ground Tire Rubber in a Twin-Screw ExtruderHU SI; TIANJU CHEN; YUNCAN ZHANG et al.Journal of applied polymer science. 2013, Vol 128, Num 4, pp 2307-2318, issn 0021-8995, 12 p.Article

Kinetics of Glycolysis of Poly(ethylene terephthalate) Under Microwave IrradiationFEIFEI CHEN; GUANGHUI WANG; CHUAN SHI et al.Journal of applied polymer science. 2013, Vol 127, Num 4, pp 2809-2815, issn 0021-8995, 7 p.Article

Manganese-, cobalt-, and zinc-based mixed-oxide spinels as novel catalysts for the chemical recycling of poly(ethylene terephthalate) via glycolysisIMRAN, Muhammad; DO HYUN KIM; AL-MASRY, Waheed A et al.Polymer degradation and stability. 2013, Vol 98, Num 4, pp 904-915, issn 0141-3910, 12 p.Article

Recycled Acrylonitrile-Butadiene-Styrene Copolymer Resin Strengthened and Toughened by an Elastomer/Inorganic Nanoparticles ComplexBINBIN LIU; HUA LEI.Journal of applied polymer science. 2013, Vol 128, Num 4, pp 2458-2467, issn 0021-8995, 10 p.Article

Characterization of polypropylene-polyethylene blends made of waste materials with compatibilizer and nano-fillerCHANGING FANG; LONG NIE; SHAOLONG LIU et al.Composites. Part B, Engineering. 2013, Vol 55, pp 498-505, issn 1359-8368, 8 p.Article

Degradation process investigation of thermoplastic polyurethane elastomer in supercritical methanolLU LIU; LIHUA TANG; YONGQIANG WU et al.Polymer degradation and stability. 2013, Vol 98, Num 12, pp 2520-2528, issn 0141-3910, 9 p.Article

Effects of Shear Stress and Subcritical Water on Devulcanization of Styrene-Butadiene Rubber Based Ground Tire Rubber in a Twin-Screw ExtruderXIAOJUN WANG; CHANGPING SHI; LING ZHANG et al.Journal of applied polymer science (Print). 2013, Vol 130, Num 3, pp 1845-1854, issn 0021-8995, 10 p.Article

Methanolysis of poly(lactic acid) (PLA) catalyzed by ionic liquidsXIUYAN SONG; XIAOJING ZHANG; HUI WANG et al.Polymer degradation and stability. 2013, Vol 98, Num 12, pp 2760-2764, issn 0141-3910, 5 p.Article